Model ER7200 - Electrical Resistance Probe

Electrical Resistance Probe for the 2” Access System with Flush Element

These probes are ideally suited for applications where the probe element needs to be flush with the wall of the pipe.

Model ER7200 Flush-Mount, Electrical Resistance Probe is a fixed-length probe

Model ER7200 Flush-Mount, Electrical Resistance Probe is a fixed-length probe for use with the 2" access system in high pressure and high temperature applications. These probes are ideally suited for applications where the probe element needs to be flush with the wall of the pipe.

The probe assembly consists of an insertion rod with an element, a hermetically sealed connector, and a hollow plug nut, which are all welded in place. The hollow plug nut on the probe screws into the hollow plug of the access system. This allows the probe to be installed in the process, using a retriever tool and service valve, without process shutdown.

Insertion lengths range from a minimum of 1.25" up to any length specified by the customer in 1/16" increments.